BPRMS - THIOKOL MC-215 BASE COMPOUND

  • MSDS: BPRMS
  • Manufacturer: MORTON INTERNATIONAL
  • Product Name: THIOKOL MC-215 BASE COMPOUND
  • National Stock Number: 8030-01-028-4336
Product Identification

Product ID:THIOKOL MC-215 BASE COMPOUND
MSDS Date:07/09/1992
FSC:8030
NIIN:01-028-4336
Kit Part:Y
MSDS Number: BPRMS

Responsible Party
MORTON INTERNATIONAL
100 NORTH RIVERSIDE PLAZA
CHICAGO, IL 60606-1598
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 714-373-2837

Preparer: DAVID B WIENCKOWSKI

Cage: DO471

Contractor
MORTON INTL INC SPECIALTY CHEMICALS GROUP
CHICAGO, IL 60606-1218 US

Telephone: 312-807-2000

Cage: 32063

Ingredients

NO INGREDIENT FOR THIS FORMULATION_INGREDIENT

Hazards

Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE: IRRITATION, PNEUMOCONIOSIS,
MECHANICAL IRRITATION. SKIN: IRRITATION. INGEST: NAUSEA, VOMITING,
GI UPSET. MAY AFFECT THE RESPIRATORY SYSTEM, IMMUNE SYSTEM.
INCREASED BENIGN & MALIGNANT TUMORS INHA L: WHEEZING, CHEST PAIN
AND PROGRESSIVEIMPAIRMENT OF PULMONARY FUNCTION.
Explanation of Carcinogenicity:CHRYSTALLINE SILICA,FORMALDEHYDE &
ETHYLENE LISTED BY CALIF-PROP 65 AS CAUSING CANCER,BIRTH
DEFECTS,OTHER REPROD HARM.
Medical Cond Aggravated by Exposure:EXPOSURE TO THIS PRODUCT IS NOT
EXPECTED TO CONTRIBUTE TO, WORSEN, OR AGGRAVATE ANY EXISTING
MEDICAL CONDITION.

First Aid

First Aid:EYES:LUSH W/WATER 15 MIN.IF IRRIT DEVELOPS,SEE DR.
SKIN:REMOVE CONTAM CLOTHING/SHOES. WASH AFFECTED AREA W/SOAP &
WATER. IF IRRIT DEVELOPS, SEE DR. INHAL: REMOVE TO FRESH AIR. IF
SYMPTOMS DEVELOP, GET IMMED MED AID. IF NOT BREATHING, GIVE ARTIF
RESP (MOUTH TO MOUTH). INGEST: GET MED AID. UNLESS ADVISED, INDUCE
VOMIT (IPECAC/FINGER IN THROAT). NOTHING BY MOUTH TO DROWSY,
UNCONSCIOUS/NO GAG REFLEX.

Fire Fighting

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:USE AGENT APPROVED FOR CLASS A HAZARD (EG
HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:THOSE EXPOSED SHOULD BE EQUIPPED W/NIOSH
POSITIVE PRESSURE SELF-CONTAINED BREATHING APPARATUS & FULL
PROTECTIVE CLOTHING.

Accidental Release

Spill Release Procedures:SHOVEL OR VACUUM SPILLED PRODUCT AND PLACE IN
CLOSED CONTAINERS FOR FURTHER HANDLING AND DISPOSAL. DO NOT FLUSH
TO SEWERS, STREAM, OR OTHER BODIES OF WATER.

Handling

Handling and Storage Precautions:FOLLOW GOOD MANUFACTURING AND HANDLING
PRACTICES. CONTAINERS CAN BE HAZARDOUS WHEN EMPTY BECAUSE IT CAN
RETAIN PRODUCT RESIDUES.
Other Precautions:DONT REUSE CONTAINER FOR FOOD, CLOTHING OR PRODUCTS
FOR HUMAN OR ANIMAL CONSUMPTION OR WHERE SKIN CONTACT MAY OCCUR.
PROD CONTAINS LESS THAN .1% FORMALDEHYDE, WHICH CAN ACCUMULATE IN
HEADSPACE OF SEAL ED CNTNRS. MAINTAIN ADEQUATE VENT.

Exposure Controls

Respiratory Protection:RESP PROTECT NOT USUALLY REQ'D. ABOVE TLV, WEAR
NIOSH/MSHA EQUIP. CONSULT RSPRTR MFR FOR APPROP RSPRTR. IF HIGH
AIRBORNE CONC, MAY NEED SCBA OR SUPPLIED AIR RSPRTR. OBSERVE RSPRTR
USE LIMITATIONS. RES P PROTECT PROGRAM (29 CFR 1910.134).
Ventilation:KEEP AIRBORNE CONC BELOW TLV, W/VENT. GENERAL (DILUTION)
VENT ACCEPTABLE, LOCAL EXHAUST RECOMMENDED FOR VAPOR,MIST,DUST.
Protective Gloves:APPROP IMPERVIOUS GLOVES (SEE GLOVE MFR)
Eye Protection:CHEM SPLSH GOGGLES,SFTY GLASSES W/SDSHLD
Other Protective Equipment:AN EYE WASH FACILITY SHOULD BE READILY
AVAILABLE. WEAR PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING, BEFORE EATING,
DRINKING, USING RESTROOM. CLEAN & DRY CONTAM CLOTH &SHOES BEFORE
REUSE.
Supplemental Safety and Health
* TREAT AT AN ACCEPTABLE WASTE TREATMENT FACILITY.

Chemical Properties

Spec Gravity:1.54 (WATER=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:RED COLORED, PASTE; SULFIDE ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Hazardous Decomposition Products:PHENOLICS, OXIDES OF NITROGEN, OXIDES
OF SULFUR, SMOKE, SOOT, TOXIC FUMES (CO, CO2), HYDROGEN SULFIDE

Disposal

Waste Disposal Methods:IF ORIG UNUSED FORM, STORE/TREAT/DISPOSE/ETC
PRODUCT AT AUTHORIZED FACILITY,IN COMPLY W/FED,STATE & LOCAL
REQ'MENTS.CONTACT GOVERNMNTL AGENCIES IF MORE INFO
NEEDED.ALTERNATIVES IN ORDER OF PREFERENCE:
1.RECYCLE/REWORK.2.INCINERATE AT AUTHZDFACILITY.*

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.